© 2010 Fly2Build.com All rights reserved
Pushrods, 36" Cable .032" w/Clevis (2 clevis, 2 threaded ends)
Package contains: One 36" (.032") Metal Cable Gold-N-Rod Push Rod System
2-56 Sullivan Pushrods, 36" Cable .056" w/Clevis (2 clevis, 2 threaded ends)
Package contains: One 36" (.056") Metal Cable Gold-N-Rod Push Rod System
E-Flite Micro Pull-Pull Sytem
Affordable Micro Pull-Pull linkage system for smaller R/C airplanes.
Use to connect Rudder or Elevator linkages securely to small, Park Flyer servos.
Appropriate for slower flying, lightweight airplanes (under 3 lbs).
Dubro Micro .032 Pushrod System 30" (2)
Comes complete with (2) 30" .032 pushrods, (2) pushrod housings, (2) Micro E/Z Links
(90 degree bend is already on pushrods) and (2) Mini E/Z Connectors. Ideal for indoor
and park flyers where a longer reach is needed.
Dubro Micro Pushrod Guide (4)
A versatile guide/support for control linkages, throttle, etc. Three holes make it
easy to accommodate different set-ups. The Micro Pushrod Guide can be used on foam,
wood, etc. For foam, just press pins through and cement with CA or epoxy and cut
off any protruding pins. If used on balsa, pre-drill small holes. The guide holes
are 0.080” diameter.
Dubro Micro Control Horns (2)
Our new Micro Control Horn measures a 1/2" in height and comes with a pin molded
on the bottom flat for easy installation and secure gluing. Pin can be trimmed off
if not desired. Ideal for indoor and park flyers. 2 per package.
Dubro Pull-Pull System Micro 2-56
Dubro Pull-Pull System 4-40
Dubro 1/2A Control Horns (2)
Ideal for indoor and park flyers. 2 per package.