12 AWG SILICONE multi-strand flexible wire.
Sold by the foot and includes both red and black wires as shown in the picture (one
This wire weighs 26.0 grams per foot of red and black combined.
Price: $ 2.99 /FT
(change quantity in shopping cart)
14 AWG SILICONE multi-strand flexible wire.
This wire weighs 19.2 grams per foot of red and black combined.
Price: $ 2.49 /FT
2 WIRE MICRO CONNECTOR
These connectors are good for battery connections on lower amperage draw applications
such as small parkflyers and indoor flyers.
Price: $ 1.99/set
(no heat shrink tube included- use our 1/16” shrink tubing below )
DEANS ULTRA MALE/FEMALE ULTRA PLUG PACK
Deans connectors have long been the standard for mid to high power batteries and
Weight as shown: 4.9g pair with tubing
Price: $ 2.99
EC3 MALE/FEMALE CONNECTOR SET
These connectors are gaining popularity in the parkflyer and sport flyer world. They
handle medium power systems well and are easier to connect than Deans Ultras.
See how to assemble them here
Price: $ 2.49
EASY SOLDERING LUGS FOR DEANS ULTRAS (10)
Sold in a package of ten, these lugs press onto the ends of Deans Ultra connectors
to help make a perfect solder connection. Fits up to 10AWG wire. Each weighs 5g.
Note that the connector is shown for explanation, and is not included.
Price: $ 3.99
DEANS ULTRA “Y” HARNESS FOR ESC
This pre-made Y harness is used to join 2 separate ESC’s to one common battery pack.
This is perfect for multiple motor airplanes like our Grumman Goose 74 kit.
12 AWG wire.
Price: $ 9.99
DEANS ULTRA SAFETY ARMING PLUG
This pre-made arming plug set is made to plug inline between your battery and ESC.
Anderson Power pole connector makes the arming connection. Comes with hardware
Total weight= 22.9grams
JST/BEC MALE CONNECTOR PLUG
Use this connector kit to assemble a male end onto your battery or brushed motor
Our wire crimper, sold separately, works nicely with these connectors- no soldering
Price: $ 0.99
JST/BEC FEMALE CONNECTOR PLUG
Use this connector kit to assemble a female end onto your ESC or charger plug wire.
1/16” BLACK HEAT SHRINK TUBING
Very good quality and easy to use- sold by the foot.
Price: $ .49 PER FT.
1/16” RED HEAT SHRINK TUBING
7/64” BLACK HEAT SHRINK TUBING
7/64” RED HEAT SHRINK TUBING
5/32” BLACK HEAT SHRINK TUBING
5/32” RED HEAT SHRINK TUBING
3/16” BLACK HEAT SHRINK TUBING
3/16” RED HEAT SHRINK TUBING
EC5 MALE/FEMALE CONNECTOR SET
These connectors are ideal for higher power applications up to 100A.
The 5mm gold bullet connectors have sockets which will accept as large as 8AWG for
4mm GOLD CONNECTOR SET
These 4mm connectors (male and female, one ea) can connect to up to 10AWG wires through
soldering. Good for high power applications up to 100A.
Price: $ 1.99
HXT 4MM CONNECTOR SET OF 10 (5 pr)
A much cheaper and easier to solder alternative to the industry standard Deans T
connectors. Connectors sets are easy because one slides into the other.
4mm connectors are good for 10 to 12AWG wires and 80-100A loads.
5 pair, 10 pcs total included
Price: $ 6.99
2 LEAD POWER WIRE
10’ length of 22 AWG power wire for your a radio system battery or charger cord.
Weight: 3.2g per foot, 32.2g for 10’ package.
Price: $ 5.49
20 AWG SILICONE multi-strand flexible wire.
This wire weighs approx. 9 grams per foot of red and black combined.
Price: $ 1.99 /FT
© 2010 Fly2Build.com All rights reserved