Clear Plastic Wing Tip Light Lens Set
The wing tip lens sheet comes with 13 different sized lenses arranged in pairs. 26
lenses in all. You will probably be able to use two for the wing tips and another
larger pair for the upper and lower beacons. If you have working lights on your model
the lenses are very useful at protecting the lamps from getting damaged. The lenses
are made with .020 PETG, the same material soda bottles are made from so you know
how tough they are. The sizes range from 2 1/8 inch long to 5/8 inch long so one
set should fit just about any model you have with enough left to share with friends.
Made in USA.
Air Cooling Scoops Assortment
This set of scoops should keep you from gluing plastic spoons to your models. There
are three types on one sheet and they come in pairs for a total of 17 scoops. Naca
scoops sizes ( width at scoop hole) 1.5", 1.25", 1" , 7/8" , 3/4" , 5/8 ", 1/2 "
High rise / High volume ( width by height ) 1 x 3/4, 3/4 x 5/8, 9/16 x1/2, 1/2 x
3/8, 3/8 x 3/16. Bullet low profile scoops ( radius at scoop opening) 3/4 , 11/16,
5/8, 7/16, 3/8.
Made in USA.
Servo Arm Farings Assortment
The servo fairings come in pairs and in three sizes, all on one sheet for a total
of 6 fairings.
large fairing is 3/8 inch wide and 1/4 inch tall. medium size is 1/4 inch wide by
5/16 tall. smallest is 3/16 inch wide and 1/4 inch tall. There is enough material
surrounding each fairing to cover the servo and is made with .020 plastic to easily
conform to the wing surface curve. The plastic can be attached with double sides
tape, silicone or epoxy. Do not use CA adhesives. All paint types except for fuel
proof is compatable with the fairings. Made in USA.
© 2010 Fly2Build.com All rights reserved